Enquire Now

LEPIC chamber (Thermal Vacuum Facility)

MANUFACTURER [Custom Build]
MODEL N/A

Department of Space and Climate Physics

RESTRICTIONS Facility only to be used for clean space flight hardware. All materials to be installed in the chamber need prior approval by MSSL.
CONTACT 1 Alex Rousseau
CONTACT 2 Dave Linder
Enquire about this item
SITE Other

Description

The Low Energy Plasma Instrument Calibration facility is a three vacuum chamber system consisting of:

  • Electron source chamber
  • Calibration chamber
  • Ion source chamber

The electron source chamber houses the electron gun assembly; essentially a UV lamp irradiates a gold layer on a quartz disk, ejecting photoelectrons which are then accelerated to the desired energy. A gate valve allows isolation between the chambers to ensure that the electron source assembly exposure to air (for example, when the calibration chamber is vented for instrument removal) is minimised to prevent deterioration of the electron gun gold surface, which can lead to reduced performance. Prior to a calibration campaign, the electron/ion beam is characterised via a raster scan of a channeltron/Faraday cage mounted on X-Y linear drives. The flight hardware is then mounted on a three-axis rotary table, allowing complete 3D manipulation of the instrument within the beam to provide a comprehensive calibration dataset.

The ion source chamber consists of: A Peabody Scientific Duoplasmatron Ion Source An Extraction gap An Einzel lens A Power supply package

This system can produce either positive or negative ions in a well focused beam. The ion beam energy can be varied over a wide dynamic range from 1 keV to 30 keV, with energy spreads typically less than 20 eV.

Ions produced in the arc discharge Duoplasmatron ion source are extracted from the source anode aperture by the Extraction Gap and then focused to the desired position by the Einzel Lens. The variable focus lens provides a wide range of beam options. By varying the extraction voltage, the final beam energy can be adjusted over a range of 1 to 30 keV.

Specification

Low Energy Plasma Instrument Calibration (LEPIC) vacuum test facility

Item ID #1965.

Last Updated: 17th January, 2014

LEPIC chamber (Thermal Vacuum Facility)

There are no publically available categories listed at present. You may have to sign in to browse this catalogue.